IATF16949标准 中文版（已更新至SI28 2025年11月发布）

flyerchang

谢谢分享

jamesbadi

路过看看

陪同2023

感谢分享

wuyue323

感谢分享

fch_123

呕心沥血 表达了无私的分享

fch_123

呕心沥血 表达了无私的分享

fch_123

呕心沥血 表达了无私的分享

fch_123

2.1 Significant Production Run

For production parts, product for PPAP shall be taken from a significant
production run. This significant production run shall be from one hour to
eight hours of production, and with the specific production quantity to
total a minimum of 300 consecutive parts, unless otherwise specified by
the authorized customer representative.

This significant production run shall be conducted at the production site,
at the production rate (see Glossary) using the production tooling,
production gaging, production process, production materials, and
production operators. Parts from each unique production process, e.g.,
duplicate assembly line and/or work cell, each position of a multiple
cavity die, mold, tool or pattern, shall be measured and representative
parts tested.

平凡人生

谢谢分享

fch_123

2.1 Significant Production Run

For production parts, product for PPAP shall be taken from a significant
production run. This significant production run shall be from one hour to
eight hours of production, and with the specific production quantity to
total a minimum of 300 consecutive parts, unless otherwise specified by
the authorized customer representative.

This significant production run shall be conducted at the production site,
at the production rate (see Glossary) using the production tooling,
production gaging, production process, production materials, and
production operators. Parts from each unique production process, e.g.,
duplicate assembly line and/or work cell, each position of a multiple
cavity die, mold, tool or pattern, shall be measured and representative
parts tested.